Skip to content
MiloHax Guides MiloHax Guides MiloHax Guides

Santroller Powered Pro Guitars

Platform
Controller

Setup

Section titled “Setup”

Be sure to [download the latest version of Santroller].
After that, start up Santroller.

If you’re using a premade adapter (like the RetroCultMods MiniHost), you may receive a warning from Santroller in the start screen.
All this means is that you can’t ask for support on the official Santroller Discord.
You can tick the checkbox and focus on the rest of the configuration.

Santroller warning the user that their device is not designed to be programmed with it.

Select your Device to program, Connection Method, and Device to Emulate.
This will usually be Raspberry Pi Pico, USB Adapter, and Pro Guitar (Mustang) or Pro Guitar (Squier) respectively.
After selecting your options, click on Configure.

Santroller's initial screen. 'Device to program' is set to 'Raspberry Pi Pico', 'Connection Method' is set to 'USB Adapter', and 'Device to Emulate' is set to 'Pro Keys'

In Controller Settings, change the following:

  • Set Device to Emulate to Pro Guitar (Mustang) or Pro Guitar (Squier)
  • Enable Use USB Passthrough with RPCS3
Santroller's Controller Settings. The settings reflect exactly what is above.

MAKE SURE YOU CLICK ON Save Settings before closing the program or you will lose progress!

Santroller with a cursor is hovering over 'Save Settings'.

When you’re done, close Santroller.

You can now launch Rock Band 3 and don’t need to touch this anymore!

[Back to Controllers]

Research by [Linos]
Santroller screenshots by [gonakil1ya]