Skip to content
MiloHax Guides MiloHax Guides MiloHax Guides

RetroCultMods V3 Adapter Guitars

Platform
Controller
  • This is specifically for the [V3 Wii/USB Adapter WITH TILT by RetroCultMods]! Please consult your sales receipt to confirm that it is indeed a V3 Wii/USB Guitar Adapter WITH TILT by RetroCultMods.
    • You can use this page for reference for V1 and V2 Wii Adapters, but you won’t have tilt.

Setup

Section titled “Setup”

Before starting, be sure to [download the latest version of RCM Programming Tool].

Start up up RCM Programming Tool.

In the start screen, set your device to program to. In this example, it was set to V3 Adapter - RB Guitar.
After that, click on Configure and wait for the progress bar to finish.

RCM Programming Tool's first screen with 'Device to program' set to 'V3 Adapter - RB Guitar'.

In Controller Settings, change the following:

  • Enable Use USB Passthrough with RPCS3
RCM Programming Tool's Controller Settings. The settings reflect exactly what is above.

It’s also suggested you calibrate your Whammy to have the best experience. Scroll down to the Whammy section and calibrate it.

MAKE SURE YOU CLICK ON Save Settings before closing the program or you will lose progress!

RCM Programming Tool. The cursor is hovering over 'Save Settings'.

When you’re done, close RCM Programming Tool.

You can now launch Rock Band 3!

[Back to Controllers]

Research by [Lynxeption], [gonakil1ya], and [SquidBoy425 (Team Oceanman)].
Special thanks to [@amphobius] for additional pictures.